EMULSOL ECO COOL – SSA225 is excellent for heavy duty cutting operations and has a very good lubricating property. In addition this has excellent bio – stability, rust protection and anti foaming property. The surrounding areas of the operations are kept clean by virtue of Tramp oil rejection. This is specially recommended for Aluminium jobs.
Advantages
- Longer sump life
- Smooth machining of Jobs with better tool life
- Excellent corrosion protection and pH Stability
- Reduced overall maintenance cost
- No Monday morning odour and low foaming
- No hazardous chemicals like free Chlorine, Phosphates, Sulphates and Nitrate
Direction for usage
- EMULSOL ECO COOL – SSA225 The recommended concentration for medium machining is 4 to 6% and for heavy duty it is 7 to 11 % . For Grinding jobs it should be 3 to 5%.
- Clean the sump while charging fresh emulsion
- The preparation of Emulsion to be done before pouring into the sump
- The Refractometer reading to be maintained between 3 to 3.5 regularly
Typical properties of EMULSOL ECO COOL – SSA225
| Sl.No. | Description | Method | Specification |
| 1. | Appearance | Visual | Amber |
| 2. | Specific Gravity @ 27°C | ASTM | 0.9384 |
| 3. | pH 5% Solution | 1298 Internal | 9.2 |
| 4. | Foam depression (in secs.) 5% in DM water | IP 312/74 | 20 Sec. Max |
| 5. | Cast Iron Chip Test (P-Dish) 1:10 Solution ( DM water) | Internal | No Corrosion |
| 6. | Emulsion Stability 1:20 solution in DM & 400 ppm | Internal | Stable |
| 7. | Hard water Thermal stability 48 hrs. under room Temperature | Internal | Stable |
| 8. | Hand Refractometer reading 1:20 | Internal | 3.5 to 4 |
| 9. | Refractometer Factor | Internal | 1.1 |
Packing & Storage
- EMULSOL ECO COOL – SSA225 is packed in steel barrels of 210 Ltrs & 35 ltrs Jerry Cans.
- Avoid spillage when decanting. Keep barrels closed when not in use. Maximum temperature of storage area should never exceed beyond 70°C.